Overview

At DeVilbiss Healthcare, we believe that a person should not be restricted because of a need for oxygen. The iFill will give you control over your ambulatory needs, allowing you more independence in your daily life.

What is the iFill?

The iFill extracts oxygen from room air and pressurises it to fill oxygen cylinders quickly and conveniently in the home.

Fulfilling your ambulatory needs
The iFill provides an unlimited refillable supply of oxygen. You can continue with your daily routine and use your prescribed oxygen supply at the same time.
Refill your cylinders as often as required.

Fill up safely and easily
With its user-friendly design and simple one-touch operation, the iFill is easy-to-use. Connect your cylinder securely with the iFill’s custom-designed push-click connector. Once connected, simply press the ‘Start/Stop’ button and the control panel lights will indicate when the cylinder is filling and when it is full. Your cylinders will be filled safely, quickly and conveniently in your own home.

Place it anywhere in your home
The iFill is a standalone unit. It works independently of your concentrator, acting as an additional source of oxygen. It can be placed in a separate room to you; giving you the freedom to either place it alongside your concentrator, or somewhere less obtrusive.

Features

  • Choice: range of cylinder sizes available for different usages
  • Convenient: can be placed anywhere in the home
  • Easy-to-use: user-friendly, safe and secure
  • Portable: cylinders can be refilled as often as required
  • Time-saving: no more waiting for your cylinders to be delivered
  • PulseDose: cylinders available with oxygen conserver PD1000

Cylinder usage (hours)*:

EN_table_2* All filling times are approximate and may vary depending on environmental conditions, such as altitude.
** All usage times are based on patient breathing at 20 BPM

Product Brochure

brochureDownload iFill  brochure, click here

Product Brochure

brochureDownload iFill user manual (device), click here

Product Brochure

brochureDownload iFill user manual (cylinder), click here

Specifications

  • Dimensions (H x W x D): 72.5 cm x 57.0 cm x 31.0 cm
  • Weight: 30.0kg
  • Oxygen concentration : 93% ± 3% (0.5 – 5l / min)
  • Electrical requirements : 230V / 50 Hz / 1.7 Amp
  • Average filling pressure: 2,000 ± 200 psig
  • Cylinder types:

EN_table_1

  • Cylinder usage time (hours)* :

EN_table_2

* All filling times are approximate and may vary depending on environmental conditions, such as altitude.
** All usage times are based on patient breathing at 20 BPM

FAQs

  • Why do I hear oxygen escaping from the fill connector after removing the cylinder? Is this safe?
    Yes, this is perfectly safe. In order to provide the ability to top up cylinders and make the connection easy, the trapped pressure must be allowed to bleed off.
  • Can I operate the iFill in a cupboard or wardrobe?
    No. There is not enough air flow in a cupboard. However, the iFill may be stored in a cupboard when not in use.
  • Can I stop filling a cylinder before it is completely full?
    Yes, the cylinder can be removed at any time during the filling process. A partially filled cylinder can be re-attached to the iFill unit and topped up.
  • Can I fill cylinders at night while I sleep?
    Yes. Simply connect the cylinder and press start. Once the iFill completes the fill process, it will stop automatically and go into standby mode.
  • How often should the two gross filters be cleaned?
    Once a week. Wash in warm soapy water and rinse thoroughly.
  • Can I use any kind of cylinder with the iFill?
    No. The iFill cylinders must be used with the iFill as they have a proprietary connection that makes other cylinders incompatible.
  • How long does it take to fill the iFill cylinders?
    Please see the downloadable brochure for the approximate fill times, please note that fill times may vary depending on environmental conditions, such as altitude